These Rigid Plastic Bushings are threaded insulating bushings used on threaded rigid or IMC conduits to prevent wires from being damaged as they pass through the end of the conduits.
Conduit Bushings
CAT# | SIZE | STND PACK | WEIGHT PER STND PACK | DIM A | DIM B | DIM C |
---|---|---|---|---|---|---|
501 | 1/2″ | 100 | 1 LB | 1.045 | .365 | .595 |
502 | 3/4″ | 100 | 1 LB | 1.281 | .365 | .780 |
503 | 1″ | 100 | 1 LB | 1.640 | .492 | 1.020 |
504 | 1 1/4″ | 50 | 1 LB | 2.000 | .485 | 1.304 |
505 | 1 1/2″ | 50 | 1 LB | 2.260 | .488 | 1.513 |
506 | 2″ | 50 | 2 LBS | 2.626 | .550 | 1.948 |
507 | 2 1/2″ | 25 | 2 LBS | 3.226 | .678 | 2.280 |
508 | 3″ | 25 | 2 LBS | 3.930 | .680 | 2.865 |
509 | 3 1/2″ | 20 | 3 LBS | 4.425 | .675 | 3.323 |
510 | 4″ | 20 | 3 LBS | 4.925 | .687 | 3.788 |
511 | 5″ | 10 | 3 LBS | 6.295 | .976 | 4.920 |
512 | 6″ | 10 | 3 LBS | 7.461 | .990 | 5.900 |
These EMT Plastic Bushings are used to protect low voltage cables from damage caused by sharp edges on the ends of EMT conduits. They may be used with many low-voltage cables including coaxial, computer, telephone, category 5e, audio, video, etc.
CAT # | SIZE | STND PACK | WEIGHT PER STND PACK | DIM A | DIM B |
---|---|---|---|---|---|
513 | 1/2″ | 100 | 1 LB | .520 | .840 |
514 | 3/4″ | 100 | 1 LB | .531 | 1.056 |
515 | 1″ | 100 | 1 LB | .625 | 1.278 |
516 | 1 1/4″ | 50 | 1 LB | .614 | 1.640 |
517 | 1 1/2″ | 50 | 1 LB | .630 | 1.915 |
518 | 2″ | 50 | 2 LBS | .627 | 2.327 |
519 | 2 1/2″ | 25 | 2 LBS | 1.230 | 3.065 |
520 | 3″ | 25 | 2 LBS | 1.230 | 3.695 |
521 | 3 1/2″ | 25 | 2 LBS | 1.230 | 4.311 |
522 | 4″ | 25 | 2 LBS | 1.230 | 4.812 |
These Grounding Bushings are threaded grounding bushings used to provide a means of grounding rigid or IMC conduits.
CAT# | TRADE SIZE | GROUNDING LUG CAPACITY | DIM A | DIM B | DIM C | UNIT PACK | STND PACK | WEIGHT (lbs) PER 100 PCS |
---|---|---|---|---|---|---|---|---|
912 | 1/2″ | #14 – #4 | 1.34 | 1.19 | 0.61 | 100 | 1000 | 7 |
913 | 3/4″ | #14 – #4 | 1.47 | 1.45 | 0.64 | 50 | 500 | 11 |
914 | 1″ | #14 – #4 | 1.63 | 1.76 | 0.72 | 25 | 250 | 15 |
915 | 1 1/4″ | #14 – #4 | 1.80 | 2.10 | 0.74 | 25 | 250 | 18 |
916 | 1 1/2″ | #14 – #4 | 2.11 | 2.33 | 0.80 | 25 | 250 | 23 |
917 | 2″ | #14 – #2/0 | 2.55 | 2.79 | 0.85 | 25 | 250 | 32 |
918 | 2 1/2″ | #14 – #2/0 | 2.84 | 3.33 | 1.10 | – | 10 | 57 |
919 | 3″ | #14 – #2/0 | 3.11 | 3.87 | 1.10 | – | 10 | 73 |
920 | 3 1/2″ | #14 – #2/0 | 3.38 | 4.42 | 1.10 | – | 10 | 88 |
921 | 4″ | #14 – #2/0 | 3.52 | 4.89 | 1.10 | – | 10 | 118 |
922 | 5″ | #6 – #250MCM | 4.80 | 6.00 | 1.13 | – | 10 | 165 |
923 | 6″ | #6 – #250MCM | 5.46 | 7.31 | 1.13 | – | 10 | 203 |